Tackle Box

Tackle box installation instructions.

Parts List

1)      Identify all Starboard plastic parts per the drawing provided.

2)      Check #8 flat head self-tapping SS screws quantity 24 - 1”, 6 - 7/8” & 2 – 1.5”

3)      2 – aluminum bushings

4)      2 – Nylon ¼ - 20 x .75” thumb screws

Assembly instructions.

1)  Using the #8 x 1.5” flat head screws attach the aluminum bushing to both part # 6.

2) Using the 2 – Nylon ¼ - 20 x .75” thumb screws thread them into part # 3 from the side with countersunk holes.

3) Attach two  sides part #3 & part #4 to part #1 using 4 - #8 x 1” screws.

4) Attach two  sides part #5 to part #2 using 4 - #8 x 1” screws. See special note if you are attaching the tackle box holder to a Miller Marine Products 32” x 14” table with a gutter assembly.

5) Attach assembly parts 3, 4 & 1 to the underside front of the table bottom side using the pre-drilled holes VERY IMPORTANT use the 7/8” length #8 screws. If the wrong screws are used they will penetrate or dimple the table top. Orientate the assembly so the thumb screws face the front of the table.

6) Attach assembly parts 5 & 2 to the underside rear of the table bottom side using the pre-drilled holes VERY IMPORTANT use the 7/8” length #8 screws. If the wrong screws are used they will penetrate or dimple the table top. Orientate the assembly so the thumb screws face the front of the table. See note if you are attaching tackle box holder to a Miller Marine Products 32” x 14” table with a gutter assembly.

7) Attach part # 7 between parts #3 & #4 using 4 - #8 x 1” screws.

8) Attach part # 6 between the two parts #5 using 4 - #8 x 1” screws orientate the aluminum bushing facing the bottom of the table and at the rear of the table.

Special Note: If you are attaching the tackle box holder to a Miller Marine Products 32” x 14” table with a gutter assembly you will not use part #2 the gutter assembly has been drilled to accommodate the  two parts #5. You will need to attach parts #5 from the bottom side of the lower gutter mount with the gutter removed from the table.